View Full Version : Carbon Fiber Care??Help??
acuralvr2002
03-25-2011, 12:38 PM
I just got a carbon fiber mugen wing used and it is in good ond. except for a couple spots. I was told that i can recoat the wing with a clear coat and it would help cover up the oxidation. Does anyone have any suggestions on what i could do. Itried plastx and it helped a lil but i wanna fix the whole wing????
talonXracer
03-25-2011, 12:53 PM
your best bet is to block it out and respray the clear on the entire wing, stay away from the spray can crap.
hothatch
05-27-2011, 11:53 PM
mines getting all smokey too it sucks
whatsvtec
05-27-2011, 11:56 PM
time for paint?
bearcat91
01-08-2012, 08:17 AM
My problem is with the hood, some clear coat bubbling, and a couple serious run spots from previous owner re clearing. should I block or is it ok to user a belt sander/orbital, w.e I have in the garage.?
whatsvtec
01-08-2012, 11:42 AM
Unless you have a D/A air sander I would block it and go forth by hand.
take out the drips with 600 and 800.
prep the rest with 800 or 1000.
Then you'll be ready for a shop to just shoot clear
Clean with soap and water and then with a tack rag.
speedstar808
01-09-2012, 06:29 PM
Hey Guys,
SSR will be soon releasing a revolutionary new product to revive your worn carbon fiber parts. If your part is getting dull or getting that white oxidation on it, our product can help. Its a 2 stage process, but very easy, fast and economical to use and do. No need to sand or respray. Of course it won't look like perfect or brand new but it will be much much better. The more time you put into it the better it will look.
Here are some prelim pics. (Took about 5 mins to have it shine like this)
http://i589.photobucket.com/albums/ss337/speedstar-racing808/cv_b41.jpg
http://i589.photobucket.com/albums/ss337/speedstar-racing808/cv_b42.jpg
How long does it last? Wax's and polishes give it the same effect and will only last a couple of months.
speedstar808
01-10-2012, 01:15 PM
How long does it last? Wax's and polishes give it the same effect and will only last a couple of months.
it depends on how often the car is outside. this product basically removes the oxidation in a quick and easy manner.
REEFERS
02-21-2012, 10:58 AM
any idea on when this product will be out? my caarbon fiber wings west spoiler is looking pretty rough
gtolio
02-21-2012, 11:16 AM
Sounds just like what I did, which is a headlight restoration kit. Not really a new concept. I used the Meguiars one. It was $20 at Walmart. Worked great.
http://www.amazon.com/Mothers-PowerBall-4Lights-Headlight-Restoration/dp/B00341MIAW/ref=pd_sxp_f_i
Here is my writeup from another site I'm on:
So last night, I decided that it was time to do some work on the carbon fiber wing on my civic. The gel coat on it has been pretty badly oxidized for a while.
Day 1:
Here are some before shots (Sorry for the shitty iphone pics, I was too lazy to mess with the real camera). I took the wing off the car to get a better handle on it while I was working on it, and obviously it needs to be cleaned up a bit underneath.
http://img546.imageshack.us/img546/3387/18068007.jpg
http://img715.imageshack.us/img715/2676/32809559.jpg
http://img854.imageshack.us/img854/8845/95367204.jpg
http://img829.imageshack.us/img829/3854/42871061.jpg
http://img191.imageshack.us/img191/8928/42357301.jpg
The underside of the wing looks brand new still since it hasn't seen any sun. My eventual goal was to get it all looking like this.
http://img33.imageshack.us/img33/761/67022286.jpg
I picked up a Mothers PowerBall 4Lights Headlight Restoration Kit and I was off.
http://img849.imageshack.us/img849/600/19734662.jpg
After a little work on the side:
http://img685.imageshack.us/img685/1351/76312563.jpg
Comparison of the side (done) next to the top (not started yet)
http://img812.imageshack.us/img812/1971/64281612.jpg
Results After Day 1:
http://img339.imageshack.us/img339/9997/11504671.jpg
http://img231.imageshack.us/img231/5877/26583632.jpg
http://img823.imageshack.us/img823/5306/43566283.jpg
So, as you can see from the pictures, there is still some oxidation in spots, but it is starting to look a lot better than it did.
I'm going to go at it again tonight and hopefully get it cleaned up some more. I may try the "severe damage" packet that was included in the box which looks to be varying degrees of fine sandpaper.
I will post some more pictures of the progress with an actual camera tonight.
Update, Day 2:
Worked on the wing some more tonight. I did a second pass on the whole thing, and it looks pretty good. I would say about 90% of the oxidation is gone, but you still see some at certain angles. I think the only way it's going to get better than this is if it's re-gelcoated, or at the very least sanded pretty good. Overall, I'm happy with how it turned out.
On to the pics.
http://img808.imageshack.us/img808/7868/img1273v.jpg
http://img39.imageshack.us/img39/967/img1276fk.jpg
http://img171.imageshack.us/img171/8671/img1280u.jpg
http://img232.imageshack.us/img232/1980/img1281v.jpg
http://img685.imageshack.us/img685/7629/img1282yt.jpg
http://img97.imageshack.us/img97/2229/img1286gg.jpg
http://img836.imageshack.us/img836/429/img1287ot.jpg
http://img198.imageshack.us/img198/153/img1288i.jpg
http://img339.imageshack.us/img339/531/img1292m.jpg
REEFERS
02-21-2012, 11:47 AM
right on! good info will start restoration tonight and let ya know how it goes
Black04si
02-21-2012, 01:01 PM
i say take to a body shop and have it sanded and cleared like i did then u dont have to worry about the oxidation on the gel coat
http://i143.photobucket.com/albums/r123/mysticgohan23/IMG00036-20101016-1114.jpg
after
http://i143.photobucket.com/albums/r123/mysticgohan23/photo1.jpg
keep it waxed like the rest of the car and its not gonna do that again
gtolio
02-21-2012, 01:15 PM
Of course that's the better option, but how much did it cost you? I'm sure it wasn't $20.
Black04si
02-21-2012, 04:44 PM
i left the spoiler at there shop and they did it while working on another car they only charged me 50 bucks they had it almost 2 weeks but it was worth it to me
whatsvtec
02-21-2012, 04:51 PM
It's all in who you know. Some people have connections to get things done cheaper than others. Even better, sand yourself and pay for a quick once over re-clear.
It's all in who you know. Some people have connections to get things done cheaper than others. Even better, sand yourself and pay for a quick once over re-clear.
This. Also there's a better satisfaction when you do the work yourself. Hard to explain though
Sent from my T959 using Tapatalk
cvicep3
02-21-2012, 05:58 PM
I painted mine, except the middle part and the carbon fiber looks kinda fade and has bubbles. I'm planning to wrap it up with carbon fiber vinyl. Anyway, does anyone had or noticed the noise from the wing and how to get rid off?
whatsvtec
02-21-2012, 07:46 PM
Velcro/felt strips between the spoiler and glass. Mine is missing it on one side, I get the rattle too.
02ep3413
06-02-2013, 07:20 AM
Double clear, the sun will always wear down a carbon fiber part.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.