PDA

View Full Version : What lb valvetrain?


Tortoise
03-31-2011, 11:40 AM
Gettin ready to put my skunk 2 stage 2s in my a1. Supertech told me to do the 90lb spring kit and the shop doin my work said to go with a stock supertech spring kit...idk what this shit even means but who do i listen to?!
Tortoise
03-31-2011, 06:08 PM
Bump! Neeed an answer asap guys!
Tnhatch03
03-31-2011, 06:13 PM
what is the stock supertech spring kit rated?

i do not want to give you the wrong advice.
Tortoise
03-31-2011, 07:59 PM
what is the stock supertech spring kit rated?

i do not want to give you the wrong advice.
Not sure but now the shop is tellin me to run the 90lb rate ones... Anyone know what i should do?!
talonXracer
04-01-2011, 05:54 AM
USE STOCK RSX typeS valve springs!!!!!!

Stag2 camshafts are not even up to typeS small lobe specs, almost, but not quite there. So why not use OEM parts(that are superior for this application?)
Tortoise
04-01-2011, 06:01 AM
USE STOCK RSX typeS valve springs!!!!!!

Stag2 camshafts are not even up to typeS small lobe specs, almost, but not quite there. So why not use OEM parts(that are superior for this application?)

The price i can get supertechs for through the shop are too good to pass up. If i decide to go with supertech should i do 90lb?
Tortoise
04-01-2011, 08:29 PM
This is a pain in the ass. Nobody has an answer?! I need to order these things!.
Tortoise
04-05-2011, 03:15 PM
Bump on this...people are tellin me stock rate,others say 76lb others say 90lb!? If im going with supertechs which one should i go with?