PDA

View Full Version : Help! Supercharger pulley nut size?



Triton88
04-03-2011, 10:16 PM
Have no idea how it happened but the nut holding on the blower pulley was missing when I was under the hood today. Not sure how long it's been off but nothing has gone wrong yet, regardless I want to get a new nut. Moss motors does not have a part number for it, gonna call them tomorrow but was wondering if it's a universal type nut, if so what size and anything special I need?


Thanks

05 hatch
04-04-2011, 01:36 PM
I don't know what a universal nut is but I would just call em and ask them for the size and go to ace hardware and pick one up. DON'T FORGET LOCTITE TOO! haha. That's what i would do. Don't forget to check your nuts and bolts kids!

Highrev1
04-04-2011, 07:57 PM
P/n 051-938 nut, hex flange, m8 x 1.25

Triton88
04-05-2011, 09:54 AM
I appreciate the help guys, I did call them, got a girl, she had no idea and took my number to call me back after she figured it out, no call back yet. The part number u listed is for a manifold nut, if u look at the picture that comes up with that part number i need the bolt labeled #1, strangely enough the part list starts at #2, perfect huh?

any ways took my caliper from work and measured the threaded nose of the blower, i got 12.02 mm. So i ordered a flanged M12, 1.75 pitch nut in black oxidized steal from mcmaster, should be at my place by the end of the day, Ill re-post if it fits or not.

Triton88
04-06-2011, 09:39 AM
Ok so go the nut fits perfectly. Just for others in the future. M12 1.75 pitch flanged nut.