PDA

View Full Version : roll center adjuster info... questions



abstract
04-07-2011, 05:56 AM
i plan on getting tir steering rod ends, and camber kits with my progress coilovers and roll center adjusters to increase handling .... BUT i have a few questions... what does this change? caster? and where does it go on the ep3? im not familiar with this product at all but i hear its necessary for good handling

car will have about a inch gap with 17's on progress coilovers (not slammed but not high either)

thanks

Euro-Yellow-Ep3
04-07-2011, 07:28 AM
bump cuz i need to know too

RHCP0801
04-07-2011, 07:31 AM
roll center adjusters replace your stock balljoints

abstract
04-07-2011, 01:35 PM
roll center adjusters replace your stock balljoints
is that where the shocks attach to the car? what do they adjust?

KaeDu
04-07-2011, 02:48 PM
They attach the lower control to the hub. They are used to make the lower control arm sit and better angle (EP3 lower control arms are engineered to angle up towards the center of the car or *possibly flat). In my opinion, depending on which set of progress coilovers you go with, a one inch drop does not requires these. These are design so that if you drop in the 1.5+ inch range that you can return the angle of the lower control arm to the angle they are designed to operate at.