Does any one have the honda acess foglight installation manual??

[Jukka]

I think i figured out how to install my european honda foglight harness, but im not 100% sure. I'm curious if any one has the USDM honda acess installation manual? I think the european harness is different than the USDM harness, or if its not, where the location of one of the connectors is.

If anyone has either a link to, or the actuall instructions, can you post them here please?? Thanks!!

[charles]

02 03
http://www.handa-accessories.com/civic/sifogs.pdf

04 05
http://www.handa-accessories.com/civic/04sifog.pdf

[Jukka]

^^ my hero..thank you good sir

EDIT: European harness is different...gotta figure this out still.

Anyone have a link to the european honda access install manual?

[charles]

no problem. Pick up a usdm set on ebay and just use the harnesses. Might just be easier

[Jukka]

I would, but I would perfer the European harness..much cleaner install/less hassel. Theres just a single wire that connects into the back of one of the harnesses that gets pinned in, its the only thing I cant figure out. I found a "how-to" on TROC, but they don't show the harness clearly enough.

Plus, our cars are already pre-wired for the european harness. The european harness comes with just a short harness for under the dash that plugs into the fuse box for power and control, the single red wire (pain in the ass to find out where it goes), and then connects to wiring thats already installed in the car that runs to the front of the car). Then it also has the front harness that once again plugs into the factory wiring behind the battery (if you look at the harness, you will see 2 nubs under the tape, 1 of them is a brown clip like what you get with the fleabay harnesses), 2 ground straps, and the connection for the bulb. Much easier to intall except the stupid red wire.

EDIT: when I figure out where the red wire goes, I'll write a How-TO for LHD north american models.

[charles]

here are some links. hopefully they give you the info you need so we can see that diy!

foglight install for facelift civics, wiring might be the same as prefacelift
http://www.epcivic.com/uploads/ukfoglights.pdf

some guys diy
http://type-r-owners.co.uk/forums/showthread.php?21240-Fitting-fogs-and-bumper-removal-on-facelift-version

[Jukka]

yea, i saw the post on TROC, it doesnt show very well where the single wire goes in. But that first link from EPcivic..THAT IS EXACTLY WHAT IM LOOKING FOR!!. OMG! thank you sooo much dude. You sir are a god among men..lol

EDIT: I found the post that has the link to that one, and it also has the pre-facelift guide aswell. Perfect, now just need to paint my front bumper and im set.

[charles]

youre welcome man, good luck!

[Jukka]

thanks man. I'll post a how-to when i go to install everything.