can you use a 2005 ep3 5 lugs hub on a 2003 ep3

[nintendokid]

correct me if am wrong but can you just buy a 5 lugs hub, and rotor for the newer ep3 to do the 5 lugs conversion. looking for the correct step to do this conversion.

[mitchlikesbikes]

Wrong section..

[AKEP]

you need the whole knuckle. the bearings are different. same for the rear. probably one of the easiest 5lug swaps to do.

you could also throw type s calipers and rotors (pads too) on while you're at it.

[RedSiBaron]

Moved to correct section...

There's plenty of info on this, its a pretty easy swap...while you are at it I suggest upgrading your brake lines, ball joints, replacing wheel bearings, and cleaning up and painting the knuckles and calipers...make everything nice :mwink: