View Full Version : can you use a 2005 ep3 5 lugs hub on a 2003 ep3
nintendokid
06-05-2011, 10:10 PM
correct me if am wrong but can you just buy a 5 lugs hub, and rotor for the newer ep3 to do the 5 lugs conversion. looking for the correct step to do this conversion.
mitchlikesbikes
06-05-2011, 11:03 PM
Wrong section..
you need the whole knuckle. the bearings are different. same for the rear. probably one of the easiest 5lug swaps to do.
you could also throw type s calipers and rotors (pads too) on while you're at it.
RedSiBaron
06-06-2011, 08:28 AM
Moved to correct section...
There's plenty of info on this, its a pretty easy swap...while you are at it I suggest upgrading your brake lines, ball joints, replacing wheel bearings, and cleaning up and painting the knuckles and calipers...make everything nice :mwink:
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.