PDA

View Full Version : Lanuch Control Using a Switch



Canuck Civic
06-12-2011, 06:20 PM
Anybody know how to wire in a switch so at the track I can turn off launch control to do a burnout then turn it back on.

Can I wire in a switch in between E22 and clutch switch? Might try it tomorrow if I have time.

AKEP
06-13-2011, 07:37 AM
it should let you burn out to whatever, the launch control is set to disable after (i think) 2mph on stock ecu. once you release the clutch and the tires start spinning it will disengage the launch limiter. if you have kpro you can set the limiter to whatever. theres nothing stopping you from burning out, besides yourself.

regardless, you should really only need to burn out at the track with some type of slick. anything else doesn't need it.