PDA

View Full Version : Help with door panel!!



02CivicSI-VTEC
07-19-2002, 12:54 AM
is there another way to open the side door panel safer without damaging it?? because i got it pop out but do not know how to get the handle, where u grib on to.( the one next to the power window button ) is there a trick to pop that out?

SBC31
07-19-2002, 05:54 AM
From what I've read before, I think you end up breaking the silver piece on the handle when you remove it.

Hondatech, can you elaborate on this one?

Silver '02 Si
07-20-2002, 04:18 PM
No, actually you don't break it...I took mine off last night...(got 2 sets of boston pro series components coming)...there is a little hole on the back side of the handle...behind the silver grab handle...stick a small screwdriver in there and press outward...silver peice pops right out...honda doesn't need to break it when the need to get in there so neither do we...make sure ALL screws are out and grab the bottom and pull firmly...it'll come with some trying...once it pops, lift up and disconnect the handle cable, door lock and window wires...there you have it...good luck, Roy