McTaggart34
06-17-2011, 11:13 PM
First DIY .. Not going to be the greatest. :mwink:
Get the wrap. Ill add a link to my brother where you can buy it.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1019.jpg
Remove the Radio, turnie noobs, (a/c,defrost) buttons, shift boot, hazard switch, knock out and the top vents.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1021.jpg
Cut the wrap about 1 inch longer, remove the white backing. place the wrap face down then place the plastic on top.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1025.jpg
Heat up all the wrap and stretch it. Don't go crazy or it will look like crap, but pull it over.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1023.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1026.jpg
Cut out the holes. Careful when cutting if you cut to far it will be ruined
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1027.jpg
Cut to about the end out my thumb nail
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1030.jpg
Test fit. trim if needed.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1031.jpg
Easy way to do the holes, heat up the spot HOT then use something (I used a Sharpie lol) keep the heat on while pushing down. Keep hold down for about 30sec so the wrap can cool and keep its shape.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1034.jpg
Here's what you should get.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1035.jpg:gheywa:
You will still need to work the wrap to forum.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1036.jpg
This is the final
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1037.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1043.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1039.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1038.jpg
Installed in the EP (Sorry for the dark picture)
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1045.jpg
Here's my brothers site http://www.therestylingcenter.com/
Best is to email jmctaggart@therestylingcenter.com
Tell him I sent you :)
If any questions, ill try my best to answer them :mwink:
Get the wrap. Ill add a link to my brother where you can buy it.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1019.jpg
Remove the Radio, turnie noobs, (a/c,defrost) buttons, shift boot, hazard switch, knock out and the top vents.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1021.jpg
Cut the wrap about 1 inch longer, remove the white backing. place the wrap face down then place the plastic on top.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1025.jpg
Heat up all the wrap and stretch it. Don't go crazy or it will look like crap, but pull it over.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1023.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1026.jpg
Cut out the holes. Careful when cutting if you cut to far it will be ruined
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1027.jpg
Cut to about the end out my thumb nail
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1030.jpg
Test fit. trim if needed.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1031.jpg
Easy way to do the holes, heat up the spot HOT then use something (I used a Sharpie lol) keep the heat on while pushing down. Keep hold down for about 30sec so the wrap can cool and keep its shape.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1034.jpg
Here's what you should get.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1035.jpg:gheywa:
You will still need to work the wrap to forum.
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1036.jpg
This is the final
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1037.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1043.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1039.jpg
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1038.jpg
Installed in the EP (Sorry for the dark picture)
http://i719.photobucket.com/albums/ww200/Dr_greenthumb1/IMG_1045.jpg
Here's my brothers site http://www.therestylingcenter.com/
Best is to email jmctaggart@therestylingcenter.com
Tell him I sent you :)
If any questions, ill try my best to answer them :mwink: