View Full Version : prelude blades! help do they fit?
smashinvtec
06-26-2011, 11:43 PM
hey i was wondering if the prelude 16 inch blades fit on the ep3 with no problem.
found a good deal on these and i just wanna make sure i can run them. im 5x114. and so is the lude blades.
thanks for your help!
Ba82Ep3
06-27-2011, 06:22 AM
I had a friend run them with no problems. I don't remember if he had to add spacers or not, but they did fit and looked pretty decent too.
smashinvtec
06-27-2011, 08:26 AM
KOOL thanks. If u talk to ur friend can u ask if he need spacers. Thanks.
Ba82Ep3
06-27-2011, 09:02 AM
Im almost positive he didn't need spacers. He did 06 SI wheels after the blades, and he DID need them for those. If I hear otherwise from him ill let ya know.
88crx
06-27-2011, 07:26 PM
You need spacers. I got a set to store my car on in winter and the rubbed on the inside front and rears. They need spacers, I'd guess 10mm or so, I couldn't use them it rubbed so bad.
Ba82Ep3
06-27-2011, 07:42 PM
And there ya have it! lol Spacers required...
88crx
06-27-2011, 07:59 PM
They're +60 I think. Way too high offset.
You might get away at stock height and no negative camber but they were all over inside wheel well and they hit my coilovers.
02TWSI
06-27-2011, 09:45 PM
Such ugly wheels. Sorry.
ep3jd
06-27-2011, 09:51 PM
Such ugly wheels. Sorry.
Qft
/thread
smashinvtec
06-27-2011, 11:00 PM
Such ugly wheels. Sorry.
they wer really cheap with brand new tires so i took the offer.
i blew one tire and the fronts were bald
smashinvtec
06-27-2011, 11:01 PM
do i need all four spacers or just two?
team ERA 5
06-28-2011, 04:17 PM
you'll need spacers for all 4, they're not staggered.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.