View Full Version : hondata IMG
lemonhead228
07-20-2011, 01:37 AM
I'm about to purchase one and I'm wondering if I buy one for my a3 now, later on I do a k24a2 swap, would it fit?
yes and no.
yes, if you use the prb/prc manifold (modified rbc) and tap the coolant port on the head and install a fitting for the coolant line. or use this (http://hasport.com/store/index.php/accessories/intake/kinad.html), but a tap and all that cost a lot less than that adapter.
no, if you use the rbc (unmodified) or rbb. there is another IMG they make that incorporates the coolant port.
lemonhead228
07-20-2011, 02:37 PM
Prb is the one on the a3 right? If anything I switch over the mani and tap the port?
Jmage
07-20-2011, 03:08 PM
From Hondata Website:
K20A2, K20A, K20A3, K20Z1 (RSX 02-05, Civic SI, CRV):
http://www.hondata.com/images/gaskets/kseriesrsx02_05civic.JPG
K20Z3, K24A2. K24A4, (06 - 07 Civic SI, TSX, Accord, Element)
http://www.hondata.com/images/gaskets/k20Z3_k24A2_k24A4.jpg
So like it been said, you'll need the adaptor or taping.
Just wanted to show you the diference.
lemonhead228
07-21-2011, 11:08 PM
Ahh I see what you mean.. sorry my noobness lol
Thanks for the info guys, I really appreciate it
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.