Launch Rev Limiter bogging?

[AKEP]

so i have my limiter set at 3500rpm, and when i go to test it out it just bounces off of it about 2-3 times and starts to bog. like hitting the maximum speed in other cars, it kills the power basically and starts back up. any help?

[rd02SiR]

Hmmm what's it set at? What are the parameters? And are you flooring it or just part throttle? When I floor it it's like a slow bounce (if that makes any sence) like bwaahhhhhh bwahhhhhh bwaaaahhh about 1/2 to 2/3 of a second per bounce. If it's part throttle, it's a much fast bounce like nanananananananana (awesome sounds effects huh?)

What kind if boging are you getting? Does it bounce then die and go way down in rpm?

[AKEP]

i figured part of the problem, it was the regular set up (12000 rpm ignition/fuel start, 4000 rpm rev limit, 1mph, 0% fuel, 0 ignition[just going to post the numbers in this order, like 2500, 4000, 3, 25, 60]).

i guess once it started to make boost it hit lean cut or something. so i tried gtimportfanatic's setup (3000, 4000, 3, 10, 35) and it started to make like 2-3 psi and went back into lean cut.

if you ever experienced lean cut its like the motor dies and then after about 1 second (or whatever its set to) the power comes back on. so for me its like rrrrrr-BRUMMBRUMM-brrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr rrrrrrrrrRUMBRUM-brrrrr. just for sound effects =]

but for serious, i don't even know how to deal with it. i tried adding fuel, up to 40% in 5% increments but nothing changed.

[Guardian]

its a tuning issue for sure, i dont tune that my self, my friend brian does.
you can contact him here speedlab.net

[AKEP]

Thanks, G.