View Full Version : a/c block off plate?
Blah1219
08-21-2011, 02:55 PM
Is there such thing as a plate that blocks off the hole where the a/c lines go into the firewall? Or am I going to have to go get one fabbed up. I deleted the a/c now that hole looks ugly.
MadLorEP3
08-21-2011, 03:05 PM
yes there is...you can buy these from honda...I would go to k20a.org and hit up rich or kyle from AFH...they can get this for you...good luck
Blah1219
08-21-2011, 04:10 PM
Sweetness!! I found the thread about firewall plugs and threw Kyle a pm. Thank ya sir!
MadLorEP3
08-21-2011, 04:30 PM
np
monjarassi
08-21-2011, 04:41 PM
http://farm7.static.flickr.com/6187/6067699162_455082fe91_z.jpg
Mine came off an 92 civic dx non ac and well it didnt really fit into the hole in the firewall but hey nothing that a lil modding wouldnt make it work. So here it is gl..
Blah1219
08-22-2011, 02:48 PM
Bad news guys... I got this pm this morning straight from Kyle for AFH
Would you happen to know the part number Ive been trying to find the engine plugs for the the 7 gen civics but haven't Had any luck,
-Kyle
Please throw out some advice to help out me and this guy. If not Ill probably get a piece a metal fabbed up and just paint it flat black.
Ba82Ep3
08-22-2011, 03:01 PM
There isnt an AC delete grommet plug because all EP's came with AC. You can try the above, or you can check this part out.
90615-S5A-003
Its a 27x56mm grommet plug. Measure the hole and see if that will work (i dont have an EP anymore or i would). If so, you have the part number and any Honda dealer can get it for ya...
the1986
08-26-2011, 05:27 PM
I just took the lines to a shop and had them cut off the tubes and weld them up. heres a pic
http://i16.photobucket.com/albums/b7/the1986/L1040488.jpg
You can barely even see it once it is mounted because its recessed in the firewall
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.