PDA

View Full Version : K Franks


03 inspire
08-30-2011, 05:56 PM
Quick question trying to look on line to see what belt you guys are using on Kfranks for the drive belt?
mitchlikesbikes
08-30-2011, 06:59 PM
this would probably get more replies in the swap section i think
Ba82Ep3
08-30-2011, 07:04 PM
A k20 drive belt CAN be used on a k24 regardless of the head used.
RHCP0801
08-30-2011, 07:05 PM
I'm using the k20a3 belt
talonXracer
08-30-2011, 08:02 PM
The K24's use the same crank pulley as the A3, and the path is identicle in length, so the A3 belt is used, easy as pie!
03 inspire
08-31-2011, 01:54 PM
even tho the deck is taller? i would think i need it to be 1in longer
talonXracer
08-31-2011, 05:13 PM
The only height difference is in the cylinders, the lower sections of the blocks are basically identicle. Everything mounts to the water passageway, and they are all compatible!
03 inspire
08-31-2011, 05:46 PM
ok cool thats what i wanted to hear :)
sleepy ep3
08-31-2011, 09:34 PM
Common question I'm sure. I was wondering this myself the other day, as my build gets closer to completion. Good thread. :thumbs:
02CivicSI-VTEC
09-09-2011, 10:46 AM
What cp are using 1st of all, because is your using a a3 cp with ep3 belton the frank you will have alotof slack.
Blah1219
09-09-2011, 11:06 AM
The only height difference is in the cylinders, the lower sections of the blocks are basically identicle. Everything mounts to the water passageway, and they are all compatible!

Alright then why do we need an em2 sway bar to clear the header if its only the cylinders that are taller? I had to test you.
RHCP0801
09-09-2011, 12:36 PM
you don't need an em2 sway bar, I still have my ep3 one on
Blah1219
09-09-2011, 01:24 PM
you don't need an em2 sway bar, I still have my ep3 one on

What exhaust manifold are you using?
RHCP0801
09-09-2011, 03:03 PM
speedstar racing raceheader