PDA

View Full Version : Wheel Fitment Help?



bonobo
09-07-2011, 10:50 PM
So I'm looking to run 16x8 with +20 offset rims on my stock height EP3 with un-rolled fenders (I could roll my fenders if it was absolutely necessary) Does anyone know if I would have a rubbing issue without a camber kit? I was planning on a front and rear ingalls camber kit in the future but also wanted to run the wheels until I bought the kit. Tire size suggestions would also be great as to what I should run the fill the wheel wells and get decent grip but at the same time not rub on the fenders.
Thanks!

blueandgoldep3
09-07-2011, 11:31 PM
So I'm looking to run 16x8 with +20 offset rims on my stock height EP3 with un-rolled fenders (I could roll my fenders if it was absolutely necessary) Does anyone know if I would have a rubbing issue without a camber kit? I was planning on a front and rear ingalls camber kit in the future but also wanted to run the wheels until I bought the kit. Tire size suggestions would also be great as to what I should run the fill the wheel wells and get decent grip but at the same time not rub on the fenders.
Thanks!

i have 18x8.5 on my car and the only reason i had to roll my fenders was because they were 18's.... i personally dont foresee any rubbing issues running a smaller rim in every aspect compared to mine thats just my thought process... tire size tho.. i have no idea lol

03civicdopejmd
09-08-2011, 04:42 AM
the rims will stick out 10-15mm out of the fenders with the +20. With the stock suspension you shouldnt need a roll. You may rub on hard hard hard turns.. Whats your plan with the car? Are you lowering it? 225.45 will look small if you dont lower it. 205-40's if you want to stretch the tires.. 225-50 if you want a meaty look. 215-45/50's should do fine too.

02TWSI
09-08-2011, 07:08 AM
Gonna look retarded at stock height

powdbyrice
09-08-2011, 04:01 PM
Gonna look retarded at stock height

troof.

save the money, lower it, then mount the wheels.

G-MaC!
09-08-2011, 09:10 PM
Gonna look retarded at stock height

This.

RedSiBaron
09-08-2011, 09:29 PM
if you lower it with that even only 1.5 it will rub BAD in the rear without major camber. i rub with 205s on rsx wheels lowered 1.8