PDA

View Full Version : help!



KBHatch
09-15-2011, 12:59 PM
I am installing new coilovers on my car and I took off the bolts from my rear top and bottom and I cannot get my strut out. Anybody have this problem before? Here are some pictures of what I am talking about. This is where I think it may be stuck at. 5294

FoReVaPmP
09-15-2011, 01:32 PM
rubber hammer.... and some WD40

blueandgoldep3
09-15-2011, 01:46 PM
rubber hammer.... and some WD40
x2

mp_02si
09-15-2011, 01:52 PM
:yeahthat:

Also if its in a bind at the bottom, it can cock the strut at an angle and cause the top hat studs to hang on the chassis.

KBHatch
09-15-2011, 04:47 PM
Thanks for the help i got the rears in and the volvo lip on, gonna do the fronts tomorrow. I'll post some pics when i get it all put back together.