Turbo steering problem anyone else?

[zozrulz]

So just installed the emusa turbo kit after months of reading opinions over this site and the car is running great but it seems every time the car goes into positive boost my eps cuts out doesnt matter if turning or going straight... anyone either have a fix for this problem or are having the same problem? I was also reading that normal vacuum is around 20-30 at idle where my car never sees more then 20 but there is no current vacuum leaks?

[AKEP]

More around -20 - -22. What's your setup/mods and do u have kpro?

[Tnhatch03]

So just installed the emusa turbo kit after months of reading opinions over this site and the car is running great but it seems every time the car goes into positive boost my eps cuts out doesnt matter if turning or going straight... anyone either have a fix for this problem or are having the same problem? I was also reading that normal vacuum is around 20-30 at idle where my car never sees more then 20 but there is no current vacuum leaks?

in half throttle boosting or full boost it seems like it is hitting some sort of fuel cut?

what spark plugs are you running?
what size injectors?
what fuel management?

[AKEP]

Please tell me you installed a dumptube...

[Tnhatch03]

do we know if it has an external wastegate? i do not know what the EMUSA kit has?

[AKEP]

Yes it's ewg. But dosnt include a dumptube. Exits straight back.

[zozrulz]

NGK - IZFR6K11 plugs
rc 650s stock fuel pump
have dump tube when first started i didnt
its not hitting fuel cut becuase it runs fine but it just looses steering

[AKEP]

you're not melting the wire harness with anything right? boost controller?

[zozrulz]

no i work at honda here in va and i have gone back over all the harnesses everything is there and working and i had checked our honda network for any bulletins or anything but nothing, and yes im running kpro

[zozrulz]

no boost controler

[AKEP]

someone help this guy, i have no idea whats wrong.

[heyvortek]

stock map sensor?!?