Danielsle
09-23-2011, 05:21 PM
I was looking around for a DIY to put the emblems I got from Showstoppersusa.com but I couldnt find one with pictures! It's pretty self explanitory but some people (like me) need pictures. So I took out my camera and took some. Hope it helps.
1. Open the hood and look at the pins. Theres 8 in total but you only really need to remove 4. But I will remove all 8.
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2150.jpg
2. Take a flat head to the honda clips and pop them out.
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2151.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2152.jpg
Should look like this
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2155.jpg
3. Pop the bumper out a little and look behind the grill for two small screws
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2157.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2159.jpg
4. To make it easier, I pulled the bumper on top of the hood latch
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2161.jpg
5. Grab a stubby phillips and take to the screws.
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2160.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2162.jpg
6. The emblem should just fall off after that. Line up the emblem make sure its the correct one. Clean the surface of the grill so you get as much stick as possible!
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2164.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2167.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2165.jpg
7. Peel and stick!
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2168.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2169.jpg
8. Put the clips back on and admire your new Honda badge!
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2170.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2172.jpg
1. Open the hood and look at the pins. Theres 8 in total but you only really need to remove 4. But I will remove all 8.
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2150.jpg
2. Take a flat head to the honda clips and pop them out.
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2151.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2152.jpg
Should look like this
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2155.jpg
3. Pop the bumper out a little and look behind the grill for two small screws
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2157.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2159.jpg
4. To make it easier, I pulled the bumper on top of the hood latch
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2161.jpg
5. Grab a stubby phillips and take to the screws.
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2160.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2162.jpg
6. The emblem should just fall off after that. Line up the emblem make sure its the correct one. Clean the surface of the grill so you get as much stick as possible!
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2164.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2167.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2165.jpg
7. Peel and stick!
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2168.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2169.jpg
8. Put the clips back on and admire your new Honda badge!
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2170.jpg
http://i951.photobucket.com/albums/ad355/Danielsle/IMG_2172.jpg