View Full Version : Need some help
totommo
10-24-2011, 01:13 PM
So I want to get these new wheels but I don't know much about fitment.
Would a 17x9 4x100 +35 offset fit in the front?
What about 17x10 4x100 +20 offset for the rears?
Civic5lug
10-24-2011, 02:26 PM
Not unless you plan on rolling your fenders. You need extra wide tires in the rear for extra traction? :mconfused: :mangel:
totommo
10-24-2011, 05:56 PM
nah i'm just going for that hella flush look and i dont wan't to buy spacers ya know? :P
Don't judge me.
Pandamanda22
10-24-2011, 06:08 PM
There is a thread dedicated to this. Maybe you should read through it. Helped me when I was in my wheel dilemma. And 17x10 +20 is going to poke pretty hard in the back. Quite noticeably a lot more than the front. You will be running quite a bit of camber stretched tires and a good roll for it to fit in my opinion..
totommo
10-25-2011, 10:41 AM
There is a thread dedicated to this. Maybe you should read through it. Helped me when I was in my wheel dilemma. And 17x10 +20 is going to poke pretty hard in the back. Quite noticeably a lot more than the front. You will be running quite a bit of camber stretched tires and a good roll for it to fit in my opinion..
Link? :D
Pandamanda22
10-25-2011, 04:04 PM
http://www.ephatch.com/forum/showthread.php?53564-New-Wheel-Tire-Size-thread&highlight=wheel+size+thread
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.