PDA

View Full Version : skunk2 turbo 1 cams



icee753
01-16-2012, 09:21 AM
ive recently installed skunk2 turbo 1 cams and i am getting a p0341 code and ideas? the car doesnt seem to be outta time? its running good idk what it could be? should i be worried?

RHCP0801
01-16-2012, 10:04 AM
just because it doesn't seem to be out of time doesn't mean it isn't. Even one tooth off can cause this code. I would be worried about it because it is a serious code to have

icee753
01-16-2012, 11:34 AM
but im am not running the car hard or anything my tuner said hes pretty sure everything went back together great and he said he would take it apart and make sure but this is my only car i only run it about 5 miles a day and im not hard on on it at all cause the car needs to be tunned as well i am turbo charged on low psi so i am getting k pro pretty soon and taking it back for a tune do you think its serious should i just take it back now?

RHCP0801
01-16-2012, 04:53 PM
if it was fine before you took it to the tuner tell him to fix it, you didn't pay all that money to end up with a check engine light at the end

mitchlikesbikes
01-16-2012, 04:58 PM
if it was fine before you took it to the tuner tell him to fix it, you didn't pay all that money to end up with a check engine light at the end

what he said.

but you should still get it tuned on k-poo asap, regardless of whether you get the code issue fixed.

icee753
01-17-2012, 08:17 AM
well he said he ill go through and fix it but this is my only car is what im saying is it a must do like right away? cause i cant k pro for about a month!

Ba82Ep3
01-17-2012, 10:14 AM
If its your only car... whats cheaper... KPro... or an engine rebuild?

Take the car back and have him fix it.

Buy KPro and find a reputable tuner.