T1R reversed tie rod question???

[Blooper0]

does anybody use or used to have them? does anybody recommend them?
or should i just get the stock ones instead?
any help or suggestions is appreciated :D

[whatsvtec]

does anybody use or used to have them? does anybody recommend them?
or should i just get the stock ones instead?
any help or suggestions is appreciated :D

If you can find them let me know.

[Blooper0]

If you can find them let me know.
http://www.speedstar-racing.com/store/catalog/product_info.php/cPath/31_46/products_id/415
there you go.
i want to get them cause my car is pretty low and my steering is loose but i've searched for answers or recommendations about them...and i've found nothing :mfrown:

[whatsvtec]

My suggestion in honesty is that's probably a waste of $$

You can have your struts machined so that the tie-rod end can be inserted from the bottom side. I've seen it done and honestly plan on doing that when I drop this spring. I wish I had links to the thread where this was done. A mod on the site suggested it to me.

[Blooper0]

machined struts? is that even cheaper than these tierods? lol

[AKEP]

need to find those shouldered nuts too.

[whatsvtec]

Yeah, it SHOULD be cheaper. I doubt someone would try and rape you by charging over $100 just to machine a little metal from your strut steering arm.