PDA

View Full Version : What to expect?



Jrw
02-08-2012, 06:21 PM
Im getting my car tuned in a few days and wondering what numbers i should be around with my setup. So if these guys dont get me close i know they robbed me.

i have:

k20/k24
440cc injects
dcrh
2.5
cai
kpro

anyone have a rough idea? thanks for your input and if there is anything else i should do to squeeze a little more power before i get a tune let me know any advice is worth hearing.

mitchlikesbikes
02-08-2012, 06:25 PM
is that a k24a1 bottom and k20a2 head?

the numbers will also depend on the type of dyno and how aggressive the tune is.

the biggest way to tell is via the butt dyno. if the car feels like you got your money's worth, then the numbers aren't so important anymore since there are so many variations.

Jrw
02-08-2012, 06:33 PM
yes it is a k24a1/k20a2 what would you expect it to be if it was your car? again thanks

AKEP
02-09-2012, 11:00 AM
180-200? nothing different than what everyone else is getting. get cams, then you'll see some reallly good numbers.

cow
02-09-2012, 11:03 AM
What to expect?http://2012apocalypse.net/sitebuildercontent/sitebuilderpictures/galactic-alignment1.jpg

http://www.noisyroom.net/blog/fourhorses.jpg

http://2.bp.blogspot.com/-y8pqeSKM50E/TSlyIoArFSI/AAAAAAAAALM/2z3xLb8ppjg/s1600/zombie-apocalypse.jpg

http://creativefan.com/files/2010/12/apocalypse-27-500x324.jpg

Jrw
02-09-2012, 06:19 PM
Haha nice pics. What cams?

iDom
02-21-2012, 11:52 AM
Looking at a nice steady and smooth power band is what you should look for, not so much peak HP/TQ numbers.

You should see peak TQ numbers between 4,000-6,000 RPM's and a drop from there. That's what I've seen to be normal with stock k24a2's

Check out this thread:
http://www.ephatch.com/forum/showthread.php?56032-100-stock-06-TSX-K24A2-in-EP3-with-bolt-ons

Notice the nice smooth power band increase.

MugenReplica
02-21-2012, 12:34 PM
Hmmm.....what to expect from getting a tune......

A much nicer part throttle and better mid-range!

MugenReplica
02-21-2012, 12:35 PM
J/K.....well not really but that and my personal guess is 220whp +/- 5whp. Good luck!!:msmile:

ep3allstar
02-21-2012, 09:28 PM
i had a set up close to yours
k20a2 head
k24a2 block
krrh
injen sri
2.5 exhaust
rbc manifold
i made 225hp 185 tq on a dyno jet
so you should be around there i added stage 1 cams and made a little more i posted my dyno after i added the cams

Civic5lug
02-25-2012, 07:14 AM
http://2012apocalypse.net/sitebuildercontent/sitebuilderpictures/galactic-alignment1.jpg

http://www.noisyroom.net/blog/fourhorses.jpg

http://2.bp.blogspot.com/-y8pqeSKM50E/TSlyIoArFSI/AAAAAAAAALM/2z3xLb8ppjg/s1600/zombie-apocalypse.jpg

http://creativefan.com/files/2010/12/apocalypse-27-500x324.jpg

:rofl: