Need Help! Replace Stock LCA's With Megan LCA's

[Black_Ep3]

Iv'e been having my Megan LCA's For a while now, and i've tried to search post, but no luck. I'm new to the EP world but im a honda guy all the way. How do i take off my stock ones is there a special tool or easy way of doing this need help!! Thanks!

[Mighty_Mouse_Ep]

It's pretty straight forward but there is one tool i recommend getting or renting is a ball joint separator. One like this one
http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_12294.jpg
I picked one up at harbor freight for like 12 bucks worked like a charm first time using it
http://www.harborfreight.com/3-4-quarter-inch-forged-ball-point-joint-separator-99849.html

[Twisted-X]

[After re-reading post]
If you're talking about the rear control arms, you need A SPECIAL SOCKET (http://www.clubrsx.com/cr/SPC-69330.html) to get the outer bolts off.

[Mighty_Mouse_Ep]

Lol yeah i re read it after i posted that. Well that tool is used to remove the from LCA's not the rear's and like Twisted-x already stated to do the rears just need i believe it is a 8 pointed or 6 pointed star bit to remove the 3 bolts on each side

[chunktwo]

Lol yeah i re read it after i posted that. Well that tool is used to remove the from LCA's not the rear's and like Twisted-x already stated to do the rears just need i believe it is a 8 pointed or 6 pointed star bit to remove the 3 bolts on each side

I believe its a 10-point socket. SPC makes one that works for the RSX. i am failrly certain its the same one for the ep3.

Manufacturer: SPC
Part Number: 69330

Looks like amazon sells it.. you can sign up for the prime membership free for a month and get free 2-day shipping. just cancel the membership if you don't want to pay/keep it..
http://www.amazon.com/Specialty-Products-Company-69330-10-Point/dp/B000SIFQOY

[Danielsle]

Or clubrsx clubep3 sells the socket

[monjarassi]

http://www.kochtools.com/index.php?p=product&id=114

[Cheep3]

If you're talking about the front control arms, what are you planning on doing with the old ones?