PDA

View Full Version : Megan Racing LCA HELP!!



Black_Ep3
02-08-2012, 09:56 PM
Dose anyone know how to replace the rear lCA's any special tools, do i need to take my car to a shop? Need help!?!

Blah1219
02-08-2012, 10:15 PM
Have you even looked underneath your car?

JaydmEp3
02-08-2012, 10:30 PM
Dose anyone know how to replace the rear lCA's any special tools, do i need to take my car to a shop? Need help!?!

no u dont need any special tools..basically four bolts take em off slap on ur megan lca and bolt it back up..simple as tht..

AKEP
02-08-2012, 10:30 PM
Dose anyone know how to replace the rear lCA's any special tools, do i need to take my car to a shop? Need help!?!


Have you even looked underneath your car?

yeah, how old are you op?

you would need an 10 point socket, its hard to find. theres no tq spec available from honda, mind you. might need a shop to do this one for ya.

if you were "honda all the way" you would know that these are the same bolts from older civics, integras(rsx), crvs, elements, so forth. these are not ep specific, nothing new by far.

and don't make more than one thread asking the same question. the how-to section is not where you typically ask for help.

whatsvtec
02-08-2012, 11:29 PM
http://www.kochtools.com/index.php?p=product&id=114

that's the socket you need, at a good price.

AKEP
02-08-2012, 11:35 PM
there it is!

omgheyitskenny
02-09-2012, 04:21 AM
I bought my 10point socket from SPC it was even a 1/2 drive :) not a 3/4 on some sites. If you know anybody thats a tech or works at a shop, they have a spare 10point on the Snap on trucks.

Black_Ep3
02-09-2012, 04:14 PM
Thanks for the help! if i haven't looked under the car i wouldn't have known that it takes a 10 point that no auto part store here has.... Honda tried to feed me a line that its an entire assembly, But anyways thanks for the help regardless if you guys are bashing on me for this.

AKEP
02-11-2012, 01:33 AM
yeah, honda sells it as a whole piece, not meant to come apart.