Where to find under carriage cover " skid plate"

[chinoman44]

i have noooo freakin idea were to order one. my has become crap with me ripping it from parking too close to the parking curb. i went to the dealership and told me it would cost me 300 to replace, which i think is BS! please can anyone help me find one.

[rd02SiR]

I forget the company that makes them, but basically they are aftermarket oem pieces, but don't fit 100%. I remember people replacing their slash shields on here.


Sent from my awful auto correcting iPhone using Tapatalk

[chinoman44]

ok but still doesnt help me lol were can i buy one thats not from the dealership?

[rd02SiR]

Try sending a msg to Corsport. I've seen oem splash shields being sold there. Contact them and see how much it would cost.

Let me know the price. I'm looking for one too


Sent from my awful auto correcting iPhone using Tapatalk

[Black04si]

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2004&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+FENDERS
better than 300 but its 150 new at majestic honda

[RHCP0801]

rip it off and leave it lol

[tinman5]

I have a good size sheet of 1/8" thick treadplate aluminum that i was thinking about using to make one.
I had fabbed one up several years ago for my S13 but the welding shop/metal worker that I used for the bends and minor welding has since shut down. I contacted another shop with a bending brake (or laithe depending on your upbringing) but that fool charges $15 a bend. Not unreasonable, but I figure at least to creases will be needed.
Not much help I realize, but if it helps any, I have been using the forward splash shield off an EM. Fits well enough with most of the holes lining up. The only exception is that big knot right below the front motor mount. I had to cut out sone clearance for that.

[Twisted-X]

Anyone know why the '02-'03 one is only $55?

#6 (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2002&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+FENDERS)

[fir3monk3y69]

when i searched last year for skidplates for our cars I found no posts. I did a search for other H cars and found a few diy. then i found on evolutionmnet the beatrush japan people and they had one on a ep3 CTR and RSX. purchased last year from kamispeed in fl

[sleepy ep3]

ok but still doesnt help me lol were can i buy one thats not from the dealership?

Your avatar makes me want to go look at porn

[chinoman44]

when i searched last year for skidplates for our cars I found no posts. I did a search for other H cars and found a few diy. then i found on evolutionmnet the beatrush japan people and they had one on a ep3 CTR and RSX. purchased last year from kamispeed in fl

you think they have anymore? how much did you pay for it?

[chinoman44]

never mind, found a website that sells them...took some digging, but i found them..

http://www.kamispeed.com/Beatrush-UnderPanel-Civic-EP3-01-05-p/br.s540340.htm


not bad, so it says it helps temps, and aerodynamics but will it protect my undercarriage? i think it well.

[fir3monk3y69]

so far its held up quiet well. I have some rock dings and drive way scratches on the panel already, since i drive it like a rally car lol

[boricua4life]

any pics? plz:mangel: i know you will have to get on your knees:mwink:
btw i checked their website and had some cool cheap items for our cars

[Type_R_Nammer]

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2002&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+FENDERS

55 bucks....#6

[chinoman44]

when i searched last year for skidplates for our cars I found no posts. I did a search for other H cars and found a few diy. then i found on evolutionmnet the beatrush japan people and they had one on a ep3 CTR and RSX. purchased last year from kamispeed in fl

is the oil pan covered? i wanted know how hard is it to do your oil change with this on...any way you can post better pics?

[fir3monk3y69]

5806 oil pan sits near the open fins i will try to take some pictures tomorrow.oil pan is covered. what you see in the open spot is so that you can jack up the car at the jack point. when its lowered the open area in the middle is covered up with a plate also.

[fir3monk3y69]

http://iamjason3.multiply.com/photos/album/11/beatrush#
the skid plate covers from just behind the radiator all the way to just in front of the catalytic converter. totally covering the whole subframe. its held in by 4 screws and it slides off so fairly easy

[Twisted-X]

I wonder if this would fit under the aluminum oil pans?

[fir3monk3y69]

i think it will fit because the rsx type s has alum oil pan and they sell one for them only difference i saw was front portion on rsx is different the front slides on. The only diff i see is if you moved your engine lower or more forward