PDA

View Full Version : question.



wowitztai
03-06-2012, 07:41 PM
i just had a honda dealer tech do my valve adjustment and as he was going to do them he said that all my rockers bolts were loose. so he tigthen them to spec and did the valve adjustment but i still have a tapping sound and when i give it gas the tapping get louder..sounds like a rod knock sorta but up top..what else could be wrong? dont feel like spending anymore money on this car. give me some help guys thanks

Draw7Seven
03-06-2012, 07:43 PM
Louder and faster or at the same rhythm?

wowitztai
03-06-2012, 08:20 PM
seems like louder and faster yes// what could that be?

AttarixEp
03-06-2012, 08:42 PM
I had a similar sound with my k20a3. Chased it forever. When I finally pulled the engine to do my swap, I tore that thing apart. Turned out a roller on the intake side was cracked and every time the cam lobe rolled over it, it created a tick sound.

wowitztai
03-07-2012, 07:08 AM
Mine is loud at low rpm and speed and quiet a little up top with high speed..imma take apart the valve cover this weekend and see if the rollers r good

wowitztai
03-07-2012, 07:15 AM
It sucks tho driving around with a loud ass tap.