PDA

View Full Version : Spoon CR93 17x7+52



j.lai
03-12-2012, 07:46 PM
So I tried doing a search for cr93 but couldn't find anything. Does anyone know if I'll have any issues running 17x7+52 (only size they make for 4x100)?? That is a very weak offset and not sure if I'll run into problems. I was looking to get 205/40 tires as well.

mitchlikesbikes
03-13-2012, 01:52 PM
they'll probably fit if you're on stock brakes. but it will probably look pretty lame. if you ran them with some 10 or 15 spacers they'd be much better.

j.lai
03-13-2012, 02:36 PM
Yeah, I'm on stock brakes..I was thinking of getting some 10mm spacers to make them +42 so I won't look as sunk

mitchlikesbikes
03-13-2012, 03:10 PM
Yeah, I'm on stock brakes..I was thinking of getting some 10mm spacers to make them +42 so I won't look as sunk

yeah i think +42 would look and fit much better. depending on tire size you could end up rubbing your suspension components with such a high offset.

j.lai
03-13-2012, 03:27 PM
I was thinking either 215/45 or 205/40

.colin
03-13-2012, 07:16 PM
I'm pretty sure that offset is not going to work but I could be wrong. Also, you're going to want meatier tires - 215/45 or 225/45


Sent from my iPhone using Tapatalk

j.lai
03-13-2012, 10:49 PM
Yeah I'm still deciding on what size tires I want.

Does anyone have a picture of the back of the cr93's? I'm not sure i there is enough room on the back to clear the studs if I get bolted on spacers.