PDA

View Full Version : tie rod problem plz help!



bluedevilI
04-13-2012, 11:57 AM
ok so i bought this set of dc5 spec func n form coils last year, my mechanic showed me the play i have with the hub, i need to know if anyone can plzzz help....
heres the story
i go to a diff mechanic and he tells me so solve the problem i would have to use dc5 spec tie rods
my question is
1.) will it fit onto the coilover and the other part connecting to the steering column?
2.) and does any other modification need to be made for these to finally fit correctly? (speaking front and back)
***i have not done any modification yet other than my mechanic placing a metal sleeve where the tie rod is loose
plz help!!!
661 607 7738

txt is easiest, if not i can try and log on to 2nite
thanks everyone for your feedback :)

MIGEEZY
04-13-2012, 12:42 PM
You needs to get dc5 tie rod ends for the front struts to fit and you shave off some of the bushing on the rear struts to fit. Here's something useful: http://www.ephatch.com/forum/showthread.php?59257-DIY-A-Spec-Suspension-on-ep3&highlight=dc5+suspension