k20a2 turbo vtec not working

[nazzleman]

Hey guys so i completed a a2 swap in my ep3. i put a greddy turbo kit on it and im running Kpro. i just upload a hondata tune on it and all is well but no vtec. whn i did the install the only thing i changed was the oil pressure sensor. it not plugged in due to a wire been ripped. so on Kpro i shut off the vtec oil pressure.. lots of oil and is at operating temp. any ideas?

[mitchlikesbikes]

well obviously if something is wrong with your oil pressure sensor then there's a really good chance that that's your problem. fix that first and then go from there.

and turning off pressure to the vtec mechanism is going to disable vtec as it runs off of oil pressure..

[nazzleman]

KK cool thanks for the info and im fixxing the pressure switch tomorrow... hopefully all is well