newep
05-27-2012, 01:45 PM
Hi, I'm about to replace a bunch of front end stuff and was looking for advice on parts.
History- replaced the struts with RSX A-spec in january. along with new tie rods, ball joints, sway bar links.
Started to get a random rattle, turns out both ball joints and sway bar links are gone again, as well as driver side rotor.
So I'm replacing all 4 rotors with Canadian tire brand ATE slotted rotors, hawk ceramic pads, stainless steel lines, dot 4 fluid.
OEM sway bar links, and because i have to pull it all apart again, energy suspensions bushing kit.
Any hints on better ball joints- not OEM?
this is a daily driver with 1 autox course a year.
History- replaced the struts with RSX A-spec in january. along with new tie rods, ball joints, sway bar links.
Started to get a random rattle, turns out both ball joints and sway bar links are gone again, as well as driver side rotor.
So I'm replacing all 4 rotors with Canadian tire brand ATE slotted rotors, hawk ceramic pads, stainless steel lines, dot 4 fluid.
OEM sway bar links, and because i have to pull it all apart again, energy suspensions bushing kit.
Any hints on better ball joints- not OEM?
this is a daily driver with 1 autox course a year.