Installed Injen mr intake now problems

[kale's blue ep3]

After installing this intake i took it for a test drive and found out my a/c does not work. So I got back home i made sure all my lines are hooked to the intake and they are. So woke up the next to drive to work I a fluctuating idle from 2.5K then dropping to 1k and it keeps repeating its self. I tried disconnecting the battery to reset the ecu and nothing same problems. I have never had issues like this from a cold air. Somebody please help.

[kale's blue ep3]

Found my a/c problem but not the idling problem

[frankdogg]

we need installed pics.

[RHCP0801]

maybe you broke a sensor on the tb

[Draw7Seven]

maybe you broke a sensor on the tb

Yeah if the idle relearn didn't do anything you probably have a sensor issue.

[kale's blue ep3]

Well I didnt ground the 3wire ground correctly because you have to relocate it when installing the intake so that fix my ac issue. And for the idling issue I drove it around with the a/c on full blast then parked and started it back up now it idles fine. But the check engine light came on didnt get a chance yet to see what it is. Thanks for the replies!