View Full Version : new exhaust now p0135 code
maribou912
06-19-2012, 02:18 PM
just got an hks hi power catback installed and now I'm throwing the p0135 code does anyone know what could be causing this or how i can fix it, i didn't have the cel when i went to get it installed
Manny Kid 15
06-19-2012, 03:59 PM
It sounds like it might be your primary sensor I would get that checked out
MANNY KID 15
ep3moschini
06-19-2012, 04:04 PM
did you unplug your o2 sensors when installing it? if you paid someone to do the work bring it back, they fucked up a sensor
maribou912
06-19-2012, 06:52 PM
I'm going to check them tonight I'll post here if one is loose or unplugged and yeah I paid them to fit it up for me
maribou912
06-19-2012, 07:54 PM
Ok just checked both sensors and there tight and plugged in and seem ok is it possible the exhaust is throwing it? Or did I just happen to lose it now
Thats an o2 sensor code bank 1. just because there on there tight does not mean the wires did not got messed up during installation to give a correct fuel ratio reading. If you have a cat i would not see why that exhaust would be throwing a cell. Sounds like an o2 sensor issue or maybe a fuse issue. per link http://www.obd-codes.com/forums/viewtopic.php?f=9&t=7628
preludeh22vtec
06-20-2012, 10:01 AM
I installed an exhaust a while back, and I was very careful not to damage the sensors when I removed them. When I got it all back together, I couldn't get the primary o2 to work anymore. I tried everything, reinstalled it a few times. I ended up just buying a new sensor and that solved the problem.
So even if you are careful, those sensors can be easy to break.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.