mRX925
06-22-2012, 10:23 PM
Just wondering if anyone got an ideas or suggestions. I'm bolting in my rear struts after installing my eibach springs and I can't seem to line up the hole for the lower control arm and rear shock. I've got the top hats loosely bolted already to keep the strut from falling but the end of the strut sticks past the lower control arm and therefore the holes don't line up.
I've tried using my stock jack to jack my strut up so its closer to the lca hole but it doesn't line up close enough to put the bolt in.
Suggestions?
I've tried using my stock jack to jack my strut up so its closer to the lca hole but it doesn't line up close enough to put the bolt in.
Suggestions?