PDA

View Full Version : offset concern.



k20ep
07-23-2012, 01:34 PM
What's up EP'ers?

I'm getting some 17x8's the offset is +22/18, I was a little concerned if ill have any isses running those offsets.. ill appreciate any info.

Thx

K20ep

charles
07-23-2012, 02:25 PM
you should have no issues...... if you are stock.

k20ep
07-23-2012, 03:44 PM
ill have maybe an finger if that gap between fender and tire.

whatsvtec
07-23-2012, 04:11 PM
What size tire are you planning to run? It will be a tight fit, but look good.

You'll probably only need to roll your fenders

b_ron
07-23-2012, 04:51 PM
you will rub.

unless you have 215's, fenders rolled, and some decent negative camber

lemonhead228
07-23-2012, 10:50 PM
you will rub.

unless you have 215's, fenders rolled, and some decent negative camber

he's on point but i dont think the negative camber is necessary

k20ep
07-23-2012, 11:29 PM
Im gonna run 215/40 falken 512.

mitchlikesbikes
07-23-2012, 11:33 PM
are you 100% commited to that offset? ~+35 will look good and allow you room for more tire.

Rick66
07-23-2012, 11:45 PM
17x8.25 +22 205/45r17

No rubbing.

Rear
http://i258.photobucket.com/albums/hh279/CobraDrifter/IMAG0716.jpg?t=1340404425

Front

http://i258.photobucket.com/albums/hh279/CobraDrifter/IMAG0746.jpg?t=1340813648

k20ep
07-24-2012, 08:24 AM
are you 100% commited to that offset? ~+35 will look good and allow you room for more tire.

Thx rick66.. that helped.

Yea.. already have the wheels. I'm getting tires today and painting lip and grill very very soon. Project coming to and end.