PDA

View Full Version : Ebay foglight install, fuse box!



minidan22
07-24-2012, 10:46 AM
6081

So I've installed everything so far from the ebay foglight kit, but I am really confused with the connections to the fuse box. I have a 1-pin connector and a 4 pin connector. I know where the 1 pin connector goes but should the four pin connector go into the socket with 3 prongs? I'm really an amateur towards electrical work..

HFPcivicSI
07-26-2012, 12:14 PM
Just to ask where in PA are you? Im in New Cumberland/HBG.

minidan22
07-26-2012, 02:41 PM
I'm from Bucks County

Euro-Yellow-Ep3
08-01-2012, 03:48 PM
dude i would suggest that u use a Oem switch and foglight harness. Ebay fogs are know to cause problems with the cluster. becarefull

RYC_2NR
03-11-2013, 06:38 PM
I have the Exact same issue with my fogs from MoonSi....
I have a 1-pin connector and a 4-pin. I have no idea how to connect it. The 4-pin only have to wires in it. I'm assuming power and ground.

Any thoughts guys??

Thank you

tinman5
03-11-2013, 07:09 PM
I *think* HandA has a PDF for the install sheet on their site. Assuming thats the case your answer maybe will be there.

Okay just checked and they are showing a seperate install guide between 02-03 and the 04-05 models. Maybe in the model change you may find an answer...

dble0
03-11-2013, 07:25 PM
not to thread jack, but I was contemplating getting a set of moon's fogs. how would one go about hooking up his fogs to an oem harness switch? or could you use his harness and an OEM switch. I am actually a car electrician, and could probably figure it out once getting the parts, but I would rather know the answers before purchasing the parts. Minidan22 if you can give me a day or two I will look in my car and check the wiring diagrams for the car and see if I can get you an answer since I jacked your thread. :mangel:

RYC_2NR
04-07-2013, 09:33 AM
I *think* HandA has a PDF for the install sheet on their site. Assuming thats the case your answer maybe will be there.

Okay just checked and they are showing a seperate install guide between 02-03 and the 04-05 models. Maybe in the model change you may find an answer...

Thanks, but this is the install sheets I'm using. Neither one show a 4-pin.
Has anyone else had this issue?

dble0, did you find a solution?

Mighty_Mouse_Ep
04-08-2013, 06:23 PM
02 ep's dont have the pins on the fuse box. Thats why Honda fogs say 03-05 ep's

dble0
04-09-2013, 07:41 AM
PM me your number

jerrymouas
04-10-2013, 07:06 PM
When I install my eBay fog a year ago, I use that diagram to hook my up and they work great. The small brown pin from the ebay harnest goes into, the 1 pin connector and the other pin that white with 1 red wire goes into the 6 pin connector spot. Pm me if you need pictures. Hope that help.
By the way my car a 2002 not sure if there the same as 04-05?

norkahinz
04-11-2013, 04:04 PM
dude i would suggest that u use a Oem switch and foglight harness. Ebay fogs are know to cause problems with the cluster. becarefull

Been there...... it suck monkey balls. I made a thread about how to fix the cluster. USE OEM SWITCH