PDA

View Full Version : Any Tips? Removing remaining Tar/Sound deadening



sincityep3
08-28-2012, 05:51 PM
Hey guys, been going at this for a few months (dry ice) and i have removed up the tar but I still have some bloches or tar and residue left scattered around and such. I have been using sand paper and goof off etc.. Just looking for alternative methods please or advice lol.

ill post better pictures on request but you can see in the picture what i may be talking about.. I want to paint it all white inside and just make it clean btw.

anyway MY question is if anyone has any tips?... for me or advice? either from experience or just know how to get up all the remaining tar.



http://img802.imageshack.us/img802/5408/imag2125.jpg (http://imageshack.us/photo/my-images/802/imag2125.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

sincityep3
08-28-2012, 07:56 PM
update: jsut used sandpaper, more dry ice goof off with another bug and tar removal hammers/mallets and flat heads.... and some muscle lol... still looks like s*** but its happy hour and I'm done for tonight.


http://img84.imageshack.us/img84/4503/imag2129.jpg
By prettyslowkay (http://profile.imageshack.us/user/prettyslowkay) at 2012-08-28

http://img856.imageshack.us/img856/186/imag2128.jpg
By prettyslowkay (http://profile.imageshack.us/user/prettyslowkay) at 2012-08-28

Guardian
08-28-2012, 08:36 PM
Heat gun

sincityep3
08-28-2012, 08:38 PM
Time to break out my Blow Dryer.. thanks. didnt think of heat.
Heat gun

USAF EP3
08-30-2012, 06:25 AM
Gasoline works too LOL. I found this out after messing with the fuel pump assembly so many times and spilling fuel everywhere. The gas just tears through that stuff and use some good hazardous liquid absorbment to soak up the gas and pat the stuff with towels to get the tar/gunk out.

the_real_7
08-30-2012, 05:46 PM
heat gun and goo gone works great for me

sincityep3
08-30-2012, 06:50 PM
I got it all up, ill post pictures later. Now i guess is to start researching how to paint the rear.(prepping etc) idk much about it..

fdnyjon
09-01-2012, 10:54 AM
Looks good man. I wish my floor board was that clean. I have a rust hole under the rear seat :(