emsep
10-23-2012, 09:58 PM
hey ephatch, I need help with my ep. I recently change my motor oil, trans fluid and did my brakes and when I took it on a test drive everything was fine, then the CEL came on. The car was still driving fine with the exception of the idle being low. I drove home and pulled the code with a code reader and it said P0341 Camshaft Position (CMP) Sensor A Intermittent Interruption. I cleared the code and the car was driving like normal for a few miles then the code came back on and the car bogged and died (same code). If I keep the rpm above 2k I could drive it, but under 2k it would bog and turn off. I replaced both sensors and still having the same problem. I did some research and it said it could be that the vtc solenoid needs to be clean so I did that and no luck. I took the valve cover off to check the timing and it looks good with no play on the chain. The car has about 217K miles on it and the motor is completely stock. Please help, I'm all out of ideas. TIA