PDA

View Full Version : 2 questions im trying to knock out in 1 thread



black05ep
12-11-2012, 08:53 PM
And yes i just saw the title says frying and not trying .Ok so first.i bought es front sway bushings and went to put them in and they didnt fit right, there was a gap under the bushing.i took them back becuause i thought it was wrong. But my friends ep has the bushings and has the same problem.is this normal and does it affect performance negatively? Has anyone else come across this?

2nd question. So im getting an02-03 types trans with a clutch and light flywheel. The clutch is from an 04-05 type s trans. Is this still compatible? Its an fx400 clutch. I dont kno the flywheel though. The clutch is overkill for my car for sure.but for 250 and my trans its a good deal.i lime the clutch engagement has chatter but i can get past it. Does anyone have this clutch? How is it? And is it compatible with that trans?

Thanks

Draw7Seven
12-11-2012, 09:11 PM
I had the FX300 but I think that's the last one with a full plate instead of a puck style... I don't want to DD a puck clutch but that's up to you. As far as everything working you should be fine since the clutch is flywheel specific. Since you're getting both I can't see any problems.

Don't know about the bushings. Good luck frying them, maybe try some different spices with them and see if low temps and extra virgin olive oil will make them a little less chewy.

black05ep
12-12-2012, 07:36 AM
I was thinkin frying would make them stiffer. So it would handle better. I kno the clutch is overkill but for the deal im getting i mightas well go ahead and do it. If i dont like it ill just swap it out.

Deadphishy
12-12-2012, 08:09 AM
Use peanut or safflower oil. It has a higher smoking point.

Deadphishy
12-12-2012, 08:11 AM
That's odd about the bushings. I don't have then so I really don't know. If I have the time at work I check.

black05ep
12-12-2012, 09:42 AM
Ahhahaha ill check that out to. Thanks

Civic5lug
12-12-2012, 06:55 PM
Edited the title for yea :msmooch:

take some pics of the gap if you can

black05ep
12-12-2012, 07:22 PM
Thanks and got it i will. It was an off the shelf 25mm/1" bushing kit. You can probably fit a couple quarters in the gal. I was thinking i would have to get an ep specific kit but she has it on hers im thinking they are all like this.

Draw7Seven
12-12-2012, 08:11 PM
You can probably fit a couple quarters in the gal.

These typos are priceless.

black05ep
12-13-2012, 07:44 AM
Hahaha its my fucking phone.i should have got a keyboard instead of all touch screen.