IACV problem - female connector

[vtec862]

My car came up with the P1519 code (Idle Air Control Valve Circuit Failure) so I take a look and the black wire came out of the connector. I'm having trouble taking out the terminal that is still in the connector so I can crimp the wire back on. Does anyone know how I should go about removing the terminal?

Picture for reference:
http://i679.photobucket.com/albums/vv156/njpnoy05/photo.jpg

[Jpax]

on the inside of the plug is how you can unlock the inner pin - you will need a pick or very small like jewelry sized flat tip screw driver. then you can lift up the locking piece, and push threw the pin on the other side.

[vtec862]

Alright thanks, Jpax. Btw, the interviews are a cool feature to the site. Great job

[gribly]

Google image search pin removal tool, and find something that looks like that or just buy one. A tiny pick or screwdriver could work, too, as stated before.

[civicSIracer]

remove the terminal connector at the pin and repin the connector and solder the two together