PDA

View Full Version : Getting tuned...... again!



superchargedk20
07-08-2013, 08:18 AM
Installed an aem tru boost gauge a little while ago. Gona go see the famous Chris Harris tomorrow at Xenocron . Wish me luck folks. I hear his dyno reads brutally low, might be butt hurt after this one .

cow
07-08-2013, 08:58 AM
Good luck, doodarood.

jeenyusss
07-08-2013, 10:13 AM
arent you in ct? ever considered bringing it to jeff evans?

either way good luck and keep us posted

superchargedk20
07-08-2013, 11:50 AM
arent you in ct? ever considered bringing it to jeff evans?

either way good luck and keep us posted
I did. But Idk anyone personally who's been tuned by Evans, only what I read online. 04ep3hatch, Gtimportfanatic; are people I actually know personally and are xenecron tuned and love it. 04ep3hatch is making 300whp on a a3 with 140+ miles on his motor. Also I sold a motor on here to a b3zzle I think is his name and he got tuned by xenocron and loved it.


Good luck, doodarood.

I love when cow post on my threads. Gives me chubby.....

rd02SiR
07-08-2013, 11:57 AM
Giusappe was tuned at Evans I believe.

b33lz89
07-08-2013, 12:03 PM
good luck with the tune let us know how it is.... and btw its not "b3zzle" lmao

superchargedk20
07-08-2013, 12:09 PM
Giusappe was tuned at Evans I believe.
No he's xenocron too. His dyno sheet is on his instagram page


good luck with the tune let us know how it is.... and btw its not "b3zzle" lmao Lmao I wasnt off by much. I give myself credit

cow
07-08-2013, 02:24 PM
I love when cow post on my threads. Gives me chubby.....Mario Goetze can relate:

http://p2.trrsf.com/image/fget/cf/301/401/images.terra.com/2012/07/11/gotzeoriginal.jpg

monjarassi
07-08-2013, 02:33 PM
Well gl man every motor is diff and hope all goes well.

superchargedk20
07-08-2013, 03:29 PM
Well gl man every motor is diff and hope all goes well.

U mean dyno?

b33lz89
07-09-2013, 12:42 PM
soo how did u make out??

superchargedk20
07-09-2013, 01:57 PM
Was a little let down because of my synchronic wastegate. Maxed out at 12 psi. Made good numbers still. Enjoy the vid!
http://i212.photobucket.com/albums/cc65/superchargedk20/DavidF-K24EP3-DynojetHP.jpg

http://www.youtube.com/watch?v=WXOelENW0B4&feature=c4-overview&list=UU6MryVtLRCGWsyCD5L1rm1w

b33lz89
07-10-2013, 07:12 AM
damm that was awesome... thats still pretty good numbers

superchargedk20
07-10-2013, 12:49 PM
Thanks bro. they actually made a bad ass video and posted on their fb page. Lmk what u guys think

http://www.youtube.com/watch?v=JDQ97JAeACI&feature=c4-overview&list=UUevKGweEkv2QWAIWsNWsvcA

playap07
07-10-2013, 10:33 PM
Man o man did this just get me hype!!!! Your baby sounds mean as shit and those numbers are pretty damn impressive!!!! What manifold are you currently running?

cow
07-11-2013, 08:53 AM
https://lh3.googleusercontent.com/-D0smVstw4Po/ULbdxo_kDeI/AAAAAAAABes/k_8R5hs6qVs/s589/meboosta.jpg

monjarassi
07-11-2013, 02:48 PM
Not bad, i still remember my stock crv motor made 359hp, and some low 300tq on only 14.1 lbs... That there was fun.... O and that was on a dynojet dyno

superchargedk20
07-11-2013, 02:58 PM
Man o man did this just get me hype!!!! Your baby sounds mean as shit and those numbers are pretty damn impressive!!!! What manifold are you currently running?

Thanks bro! Intake or exhaust u wana know ?

superchargedk20
07-11-2013, 03:02 PM
https://lh3.googleusercontent.com/-D0smVstw4Po/ULbdxo_kDeI/AAAAAAAABes/k_8R5hs6qVs/s589/meboosta.jpg
Chubby.....

Not bad, i still remember my stock crv motor made 359hp, and some low 300tq on only 14.1 lbs... That there was fun.... O and that was on a dynojet dyno

Synchronic wastegate + aem tru boost = bad combo... My boost maxed at 12 psi which sucked. Nxt yr bigger Intercooler , piping , dp, tial wastegate. I'm still running everything from the revard kit, time for a few changes. Hoping for 360+

monjarassi
07-11-2013, 05:23 PM
Chubby.....


Synchronic wastegate + aem tru boost = bad combo... My boost maxed at 12 psi which sucked. Nxt yr bigger Intercooler , piping , dp, tial wastegate. I'm still running everything from the revard kit, time for a few changes. Hoping for 360+


Yea I was on a all virgin revhard kit too. Except no turbo intake.

superchargedk20
07-12-2013, 01:22 AM
first kill on the new tune! An STI. The GF still a rookie at recording. THe STI passenger counted to 3 and we took off. Put a good bus on em within a few seconds. We raced a second time and the same outcome.

http://www.youtube.com/watch?v=LjWSHjU1G2M&feature=youtu.be

b33lz89
07-12-2013, 04:43 AM
an STI is a hell of a kill to start with.. dammm car sounds sexy

Ba82Ep3
07-13-2013, 06:33 AM
Reasons for going synchronic? Reasons for changing? I cant decide on what route to go. I keep getting hung up on the thought that the synchronic setup will be more responsive... but Tial keeps coming up as a fave amongst most...

superchargedk20
07-13-2013, 11:58 AM
Reasons for going synchronic? Reasons for changing? I cant decide on what route to go. I keep getting hung up on the thought that the synchronic setup will be more responsive... but Tial keeps coming up as a fave amongst most...

When i bought my revhard kit it was included in the kit. There's nothing wrong with the synchronic . I just made the mistake of running a aem tru boost with it. If u plan on not running a boost controller the synchronic is the best wastegate in my opinion. But with a boost controller u dont get much room to work with. I was getting 10.5 psi off my wastegate and maxed the boost controller snd only saw 12 psi. That's ridiculous. It cost me atleast 20 whp on the dyno. Instead of 14 psi I'm on 12. I'm going with tial nxt year

Ba82Ep3
07-14-2013, 12:47 PM
Thanks for the input. I just watched some more vids on the Synapse WG and BOV... and since i want minimal electronic control... these look more and more appealing. The video on spring preload and rate was interesting as well...

superchargedk20
07-14-2013, 01:14 PM
Def man. Just remember on a k gona be a pita to adjust the boost with where its located

donsep3
07-14-2013, 08:58 PM
you running kpro, how does it build boost on the 2step?

superchargedk20
07-15-2013, 07:27 PM
you running kpro, how does it build boost on the 2step?

Kpro yes. And im not sure but I think its caus I have a boost solnoid. I remember awhile back people wondering how to build boost off of 2 step

1GR8EP3
07-15-2013, 08:20 PM
Nice numbers sk20... kpro builds boost off the two step by retarding and adding fuel to build the boost, I think I could be wrong as I havent messed with it for a while haha.

superchargedk20
08-09-2013, 06:59 PM
Some fresh earl for the ep
http://i212.photobucket.com/albums/cc65/superchargedk20/IMAG0386.jpg