View Full Version : Anyone have a how-to replace serpentine belt
team ERA 5
07-18-2013, 07:43 PM
Thanks in advance.
usedep3
07-18-2013, 08:12 PM
it's 4-20 and 4-26 in the helms.
You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20
It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
Sucka
07-18-2013, 08:52 PM
it's 4-20 and 4-26 in the helms.
You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20
It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
Hi Jim!
Follow Mike's instruction. It's super easy!
team ERA 5
07-18-2013, 09:34 PM
Sounds like a plan. Thanks guys! My belt looks like bacon! Lol
usedep3
07-18-2013, 09:44 PM
It's a lot easier than you'd expect.
J, if you need a copy of the helms let me know.
Sucka
07-20-2013, 06:46 PM
sounds like a plan. Thanks guys! My belt looks like bacon! Lol
bacon strip!
SiBoosting11
06-20-2016, 05:18 PM
It's a lot easier than you'd expect.
J, if you need a copy of the helms let me know.
Could you send me a copy of the helms plz?
it's 4-20 and 4-26 in the helms.
You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20
It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
Aa
KaManDew
10-09-2018, 11:39 AM
*A 14mm wrench and another larger wrench for leverage.
alimaket
05-30-2022, 04:48 AM
Finally, because they haven't been broken in yet, leather belts might seem a lot tighter when you first get them, but this will improve over time.
gyms to go (https://www.gymstogo.com/product/cap-olympic-rubber-bumper-plates-black-10-lb/)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.