Anyone have a how-to replace serpentine belt

[team ERA 5]

Thanks in advance.

[usedep3]

it's 4-20 and 4-26 in the helms.

You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20

It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.

[Sucka]

it's 4-20 and 4-26 in the helms.

You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20

It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.

Hi Jim!

Follow Mike's instruction. It's super easy!

[team ERA 5]

Sounds like a plan. Thanks guys! My belt looks like bacon! Lol

[usedep3]

It's a lot easier than you'd expect.

J, if you need a copy of the helms let me know.

[Sucka]

sounds like a plan. Thanks guys! My belt looks like bacon! Lol

bacon strip!

[SiBoosting11]

It's a lot easier than you'd expect.

J, if you need a copy of the helms let me know.

Could you send me a copy of the helms plz?

[tqk]

it's 4-20 and 4-26 in the helms.

You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20

It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.

Aa

[KaManDew]

*A 14mm wrench and another larger wrench for leverage.

[alimaket]

Finally, because they haven't been broken in yet, leather belts might seem a lot tighter when you first get them, but this will improve over time.
gyms to go (https://www.gymstogo.com/product/cap-olympic-rubber-bumper-plates-black-10-lb/)