PDA

View Full Version : Megan Racing coilover straight arm.



lordofthesiths
08-01-2013, 12:16 PM
I didn't realize the meagan coilovers i ordered where the straight arm ones. The pic on the site i ordered from shwed the bent ones. So my question is do i need to use the roll center adjusters "extended ball joints"? I dont plan on going to low. I already have the Megan roll center adjusters but don't want to use them if i dont need to. Also once i have everything installed im going to get an alignment. whats a good setting for a daily driver for alignment and camber?

black05ep
08-01-2013, 12:59 PM
The RCA's aren't for the coilovers. They are for your front Lcas they correct the angle of them. They aren't needed but when u lower the car its going to put stress on the lower ball joint. The straight arms are good because it keeps your steering rack low.

lordofthesiths
08-01-2013, 01:16 PM
Ok for some reason i was thinking the ball joints allso affected the angle of the tierods.

black05ep
08-01-2013, 03:32 PM
Not that I am aware. If they do its minimal.

mussh
08-01-2013, 06:39 PM
I have the megan coil over.

I used the megan roll center adjusters and moog tie rod ends.
I have a 0 toe and my car rides pretty nice.

I would put the roll center adjusters on.

black05ep
08-01-2013, 07:14 PM
Yea. If u gotm. Might as well use them.

lordofthesiths
08-03-2013, 12:47 PM
Ok cool. Thanks guys