PDA

View Full Version : DC5 Tie Rod Ends



eloc49
08-10-2013, 02:33 PM
I recently installed my DC5 spec Megan Street coilovers on my EP. The tie rod ends I used for the install were the 0857 inverted tie rod ends from clubrsx. I didnt realize that those coils use a reverse taper, so now I basically have inverted tie rod ends on an inverted taper :doh: I know that you have to use DC5 tie rod ends with DC5 spec coils, and that they have to be longer than the stock ones. What would anyone reccomend as far as getting a stock DC5 tie rod end that will give me enough room to adjust toe?

mussh
08-10-2013, 03:56 PM
i have the megan coil over.
i used the megan roll center adjusters and MOOG tie rod ends.
i have a 0 toe and my car rides nicely.

i had ssr inverted tie rods and found they made the whole scenerio WORSE.
MOOG "problem solvers" did in fact solve my problems.

eloc49
08-18-2013, 01:35 AM
Would these be the ones that youre running? http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_tie-rod-end-moog_20973599-p?zoneAssigned=1#fragment-1

All of the RSX specific Moog tie rod ends seem like they'll be way too short

StimulisRK
08-20-2013, 12:10 AM
I have DC5 Racelands and bought Moog DC5 tie rod ends of Amazon and have no toe issues.