PDA

View Full Version : 17x9 front fitment questions



ebizzle361
10-21-2013, 10:21 PM
I'm looking at some 17x9 +18. I initially was looking for +35 but came across these. I'm not doing this for the stance blah blah. I make around 400hp and want a wide tire up front and still want it to look good. I'll be running koni yellows with ground control coilovers. I know I will have to run camber but is -3 good enough? I want to run a decent size tire up front as well. Maybe 235+. Any input is definitely appreciated and if you have pictures that's even better!! Thanks

Hasbro
10-21-2013, 10:42 PM
Get ready to pull the fenders at least 2" up front.

ebizzle361
10-22-2013, 12:27 AM
I'm not really into pulling the fenders. So should I go with a +35?

b_ron
10-22-2013, 07:55 PM
Still probably have to roll your fenders flat. I had 235's on my 17x8, you can probably go wider than 235's.

ebizzle361
10-23-2013, 03:03 AM
I have 235 40 17 right now and the rear rubs a little. I definitely will roll front and rears.

locoep3
10-25-2013, 10:11 PM
Still probably have to roll your fenders flat. I had 235's on my 17x8, you can probably go wider than 235's.

Sorry not trying to jake thread but what fitment issue did you have with the 17x8? And what offset do you have I want to run the size any help would be great

ebizzle361
10-25-2013, 11:14 PM
+38 and the only problem I've had is a little rubbing on the rear fenders.

lemonhead228
10-26-2013, 12:23 AM
If youre only running 235 get 17x8. They're good up to 245 if you want that beady look

locoep3
10-26-2013, 09:54 AM
+38 and the only problem I've had is a little rubbing on the rear fenders.


If youre only running 235 get 17x8.
They're good up to 245 if you want that beady look

Thanks guys! I was asking cuz the one I want are 17x8 +25 plus I want a nice size tires