View Full Version : Buddyclub N+ Guys quick question
PBRxEP3
02-01-2014, 07:00 PM
Just grabbed a set of N+ online and while unboxing them I notice something that I don't ever recall seeing on any set of coilovers on this site before . I was hoping other buddy club owners could tell me if this looks normal . The rear lower bolt hole / bushing on any set iv seen has always been center but these aren't, is this normal? other than that they look amazing and seem to be high quality . Also is anyone also running the buddy club ball joints and the steering arm bracket together ? Was also considering js racing tie rods.
6669
chrisbtsc
02-01-2014, 10:30 PM
I don't know either way because I'm not familiar with these, but that doesn't look right to me.
usedep3
02-02-2014, 12:25 AM
I'm pretty sure it's suppose to look like that.
Here's a link i found after a quick search: http://forums.clubep3.com/showthread.php?t=847774
lemonhead is a member here as well so hopefully he'll chime in
Ep3easternshore
02-02-2014, 12:40 AM
Mine doesnt look like that, its on center! Whic car spec are they? Might be em2
Sent from my iPhone using Tapatalk
AKAahlecks
02-02-2014, 06:54 AM
Looks right to me. My RSD's look like that.
RickEP3
02-02-2014, 11:55 AM
Looks normal to me. The picture below is from my set.
6670
Ep3easternshore
02-02-2014, 11:55 AM
http://img.tapatalk.com/d/14/02/03/pesynybe.jpg
Sent from my iPhone using Tapatalk
chrisbtsc
02-02-2014, 03:58 PM
What is the purpose/reason to offset them like that?
PBRxEP3
02-02-2014, 07:16 PM
Thank you for all the feedback. I would also like to know why its design this way when every other coil over on the market are in the center. What is the benifit . does anyone have any stiffness settings there currently running that they recommend? and lastly does anyone have a picture of there's maxed out on 16 inch wheels?
EP3Lov3
02-03-2014, 11:33 AM
Thank you for all the feedback. I would also like to know why its design this way when every other coil over on the market are in the center. What is the benifit . does anyone have any stiffness settings there currently running that they recommend? and lastly does anyone have a picture of there's maxed out on 16 inch wheels?
you should adjust damping based on your personal preferences
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.