PDA

View Full Version : Diy ! Ukdm ctr steering wheel mod



Ep3easternshore
03-08-2014, 01:28 AM
DO IT WITH YOUR OWN RISK


First of all take the baterry out!
Wait 30 minute to be safety( airbag power with low woltage so just be wait little bit and tap the positive wore to ground to pull some electrons out)
Second
Remove the air bag offhttp://img.tapatalk.com/d/14/03/08/mahy9u4e.jpghttp://img.tapatalk.com/d/14/03/08/vuha3eba.jpg
2 star shaped bolts! Remove them pull the air bag plug off ( yellow one ) next to screw
http://img.tapatalk.com/d/14/03/08/ybezerug.jpg
Now air bag is out

Here what i did was changing whole airbag system but you dont have to it. It was the hard way! I wasnt know the other way but its seems way easier
Third is get a vise grip and take the 4 bolt on top of the airbag secures the inflater
http://img.tapatalk.com/d/14/03/08/pe7u5u2a.jpg

http://img.tapatalk.com/d/14/03/08/buqysama.jpg
And here is difference between the ctr and si airbag
One is single wire other double
Take them out and switch them
Fifth just go the reverse way the put the airbag on !
Now u have beautiful steering wheel airbag cover ! http://img.tapatalk.com/d/14/03/08/a3adezy6.jpg



Sent from my iPhone using Tapatalk