progress rear sway bar

[alaehp3]

Hellow fellaws is anyone here running a progress rear sway bar in your ep . Hows the ride and anyone has a DIY to install it.
Thanks

[ericfrom702]

it made the rear stiffer obviously and as far as installing it it was easy except removing the end links

[alaehp3]

it made the rear stiffer obviously and as far as installing it it was easy except removing the end links
thank you for the input man

[usedep3]

Instructions directly from progress: http://www.progressauto.com/ecom/download/62.0103.pdf

It;s really just a bolt on affair.

Make sure you have the bar oriented the correct way. Some people will install the actual sway bar upside down and end up rubbing issues with the axleback.

Also, when you're ready to remove those (2) M12 bolts, I like place a jack to support the rear LCA/hub/knuckle. Right after you remove the bolt, put a screwdriver into that hole to keep LCA from falling out of alignment. This will make the reinstall a little easier.

Good luck!

[cow]

My Progress rear anti-sway bar was so awesome it accidentally got my girlfriend pregnant. She was like, "Next time, go 22mm, not 24mm. It's too tight a fit."