Loose clutch/Clutch fluid

[Postman158]

Hey guys,

I got in my car to head to work a couple days ago, and when I pushed in my clutch to start my car, it was completely loose. It wouldn't grab at all, and I had to manually pull my clutch back up with my foot. I tried adding some DOT 3 fluid to the clutch fluid resivoir and pumped my clutch numerous times, but still no luck.

Any suggestions?

[Her-Name's-Ally]

Bleed the clutch.

[Postman158]

Thanks, I'll give that a shot when I can.

[Her-Name's-Ally]

no problem Lmk if it works out.

[Dreadknotz1025]

It will be your clutch master cylinder OR Slave cylinder. Look for fluid around your Slave or it could just be your triangular plated master cylinder.

I replaced mine recently with a 00 civic EM2, works great!

[usedep3]

Bleed the clutch.


It will be your clutch master cylinder OR Slave cylinder. Look for fluid around your Slave or it could just be your triangular plated master cylinder.

I replaced mine recently with a 00 civic EM2, works great!


This. It sounds like there's probably a leak or air in your clutch line. You want an EM2 CMC (not 2000, you're looking for 2001-2005)